Danemarca – Echipamente de laborator, optice şi de precizie (cu excepţia ochelarilor) – The supply of a SMARTLab SE multipurpose diffractometer

Københavns Universitet Klagenævnet for Udbud The supply of a SMARTLab SE multipurpose diffractometer UCPH needs to buy a high resolution, multipurpose X-ray powder diffractometer for atomic scale structural analysis of solid state materials. The instrument must be optimized for Bragg Brentano reflection geometry including in situ experiments under variable temperature and gas atmospheres with fast heating rates. The instrument should be equipped with a Cu X-ray tube and a detector with excellent energy discrimination. Kontrakten blev tildelt direkte efter offentliggørelsen af en profylaksebekendtgørelse. I henhold til LBK nr. 593 af 2.6.2016 om Klagenævnet for Udbud med senere ændringer, gælder følgende frister for indgivelse af klage: Klage over udbud eller beslutninger omfattet af udbudslovens afsnit II, som ikke er omfattet af lovens stk. 1, skal, jf. lovens § 7, stk. 2, være indgivet til Klagenævnet for Udbud inden: 1) 45 kalenderdage efter at ordregiveren har offentliggjort en bekendtgørelse i Den Europæiske Unions Tidende om, at ordregiveren har indgået en kontrakt. Fristen regnes fra dagen efter den dag, hvor bekendtgørelsen er blevet offentliggjort; 2) 30 kalenderdage regnet fra dagen efter den dag, hvor ordregiveren har underrettet de berørte tilbudsgivere om, at en kontrakt baseret på en rammeaftale med genåbning af konkurrencen eller et dynamisk indkøbssystem er indgået, hvis underretningen har angivet en begrundelse for beslutningen; 3) 6 måneder efter at ordregiveren har indgået en rammeaftale regnet fra dagen efter den dag, hvor ordregiveren har underrettet de berørte ansøgere og tilbudsgivere, jf. § 2, stk. 2, eller udbudslovens § 171, stk. 4; 4) 20 kalenderdage regnet fra dagen efter at ordregiveren har meddelt sin beslutning, jf. udbudslovens § 185, stk. 2, 2. pkt. Har en ordregiver fulgt proceduren i lovens § 4, for at sikre, at en kontrakt ikke erklæres for uden virkning, jf. lovens § 7, stk. 3, skal en klage over, at ordregiveren i strid med udbudsdirektivet har indgået en kontrakt uden forudgående offentliggørelse af en udbudsbekendtgørelse i Den Europæiske Unions Tidende, være indgivet til Klagenævnet for Udbud inden 30 kalenderdage regnet fra dagen efter den dag, hvor ordregiveren har offentliggjort en bekendtgørelse i Den Europæiske Unions Tidende om, at ordregiveren har indgået en kontrakt, forudsat at bekendtgørelsen indeholder begrundelsen for ordregiverens beslutning om at tildele kontrakten uden forudgående offentliggørelse af en udbudsbekendtgørelse i Den Europæiske Unions Tidende. Senest samtidig med at en klage indgives til Klagenævnet for Udbud, skal klageren, jf. lovens § 6, stk. 4, skriftligt underrette ordregiveren om, at klage indgives til Klagenævnet for Udbud, og om, hvorvidt klagen er indgivet i standstill-perioden, jf. § 3, stk. 1 eller 2, eller i den periode på 10 kalenderdage, som er fastsat i § 4, stk. 1, nr. 2. I tilfælde, hvor klagen ikke er indgivet i de nævnte perioder, skal klageren tillige angive, hvorvidt der begæres opsættende virkning, jf. lovens § 12, stk. 1. Klagenævnet for Udbuds egen klagevejledning kan findes på naevneneshus.dk. Mercell Holding ASA Direkte tildeling Critical mandatory features to enable the extremely high analytical performance, ease of operation and multipurpose application to include: 1. The supplier must guarantee a minimum goniometer radius of 300 mm applicable for all types of measurements, optical components, and attachments with a goniometer measuring range of -10 to 160 (2Thea) or wider. 2. Automatic optics and sample stage recognition; automatic alignment function for all components of X-ray optics. Sample and optics alignments are very important and require an expert experience. Since alignment results are saved with each optical device and attachment, the aligned positions can be restored readily even when optics are changed, no matter the experience of the user. In addition, users are able to create measurement flows according to their own needs. Basic functions can be combined to create users’ own recipes for measurement or automatic maintenance. Component recognition function checks whether units are correctly changed by user. Plug and play functionality by fully automatic, real-time component recognition. That decreases measurement errors, leading to configuration and results being always correct. 3. Computer controlled incident, anti-scattering and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm step, Length-limiting Slits: 2.0, 5.0, 10.0 mm) 4. The required detector must provide excellent XRF suppression, energy resolution of approximately 340 eV at CuKa (in reduced X-ray fluorescence mode), and enable filterless Kβ radiation suppression. Seamless switching between 0D, 1D and 2D measurements mode using a single detector platform. The detector shall have pixel size of 75 x 75 um pixel size. The detector must be fully integrated into the XRD system and software environment to enable seamless transition between measurement modes without additional hardware changes or software platforms. 5. Attachment platform able to automatically adjust vertical (Z) position of sample in all configurations of diffractometer with height adjustment of 10 mm or wider 6. The contracting authority requires a fully integrated reactor-based sample environment that enables in-situ diffraction measurements under controlled reactive atmospheres without the need for third-party modification, bespoke integration work, or additional validation activities. The required system must provide temperature operation from RT to around 1000°C, rapid heating rate up to 300 degrees per minute, and rapid cooling from 1000°C to 100°C within approximately 6 minutes. The holder must have ability measure in inert (N2, He) and reactive (CO2, CO, H2 etc) gasses. The sample holder must be made of low reactive material, e.g. black quartz glass, to ensure the sample does not react with catalyst sample types. These capabilities are necessary to support the study of kinetic phase transformations and metastable material states. The ReactorX sample environment and XSPA-400 ER detector collectively meet these mandatory requirements. The XSPA-400 ER detector provides high-energy-resolution detection, seamless pixel-array technology and the sensitivity required for weak diffraction measurements in complex materials systems. The ReactorX attachment provides the required high-temperature and reactive-atmosphere measurement capabilities within the same validated instrumentation platform. The SmartLab SE platform is required as the host instrument for implementation of the ReactorX sample environment and XSPA-400 ER detector. The procurement requirement is therefore driven by the need for this integrated analytical solution rather than by the diffractometer platform in isolation. SmartLab SE provides automated alignment, component recognition and integrated control of the required accessories, enabling operation as a single validated measurement platform and reducing technical, operational and validation risks associated with multi-vendor integration. The contracting authority has assed the market and determined that no other commercially available solution is capable of meeting all the mandatory requirements simultaneously within a single manufacturer-supported and validated platform. Contract for the supply of a SMARTLab SE multipurpose diffractometer Ramcon A/S Konkurrence- og Forbrugerstyrelsen DNK 01 education 29979812 Askekroken 11 [email eliminat] none 2d0e9fce-a81e-417d-9a00-f2f7fd1e0dc8 https://www.kfst.dk [telefon eliminat] [telefon eliminat] supplies København K 8800 04 ••• ••• 00 Nørregade 10 Viborg 2026-10-19+02:00 DK041 CON-0001 [telefon eliminat] quality 0 32014L0024 1 Universitetsparken 2 per-exa can-standard http://www.ku.dk/ 2000-01-01Z https://naevneneshus.dk/start-din-klage/klagenaevnet-for-udbud/ body-pl 37795526 Tilbud fra Ramcon 29 TEN-0001 eforms-sdk-1.13 RES-0001 Nævnenes Hus, Toldboden 2 2029-10-01Z 202/2026 2026-10-16+00:00 07:31:06+00:00 complainants 12044976 980921565 2100 [email eliminat] 07:23:33+00:00 DAN 0277 Carl Jacobsens vej 35 2.3 38000000 ted-esen 10294819 neg-wo-call selec-w [email eliminat] DK011 DK013 t-med 2500 ORG-0003 ORG-0004 ORG-0005 ORG-0001 ORG-0002 Oslo -1 DKK [telefon eliminat] NO081 Birkerød no-eu-funds NOR https://eu.eu-supply.com/ctm/company/companyinformation/index/166597 true [telefon eliminat] win-ten-val eSender no technical eo-int 1165 http://mercell.com/ medium 3460 LOT-[telefon eliminat]/26-7000 Maja Gottschalk Barnekov TPA-0001 København Ø false bae86e9f-cfc1-48e3-b59f-87ddf39e0b4b [email eliminat] 373d63f2-3ff7-4b74-9529-6a6dbf494342-01 Valby 100 [telefon eliminat] not-val